YT-82458 2 in 1 hot air soldering station with a LED screen, temperature regulation and many functions, that will help with a correct soldering process.

The station supports 908D soldering flask with 900M series blades and a hot-air handle with brushless fan driven blower.

Features of  the digital, dual LED screen with a blue backlight:

• set and current blade/blower temperature
• sleep mode status
• maintaince alerts
• blade/blower mode

908D soldering flask with a solid metal stand:

• work voltage: 24 V
• blade type: 900M
• ceramic flask
• cord lenght: 1 m
• weight: ~ 100 g

 Hot-air handle with brushless fan driven blower:

• diameter of nozzle holder: 2 1mm
• ceranuc heater
• cord lenght: 1 m
• weight: ~ 200 g

The 2-in-1 hot air soldering station with the symbol YT-82458 is made with ESD-safe technology, which guarantees no build-up of excess electrostatic charge on the housing which prevents damage to the delicate SMD chips. I takes around 15 seconds for the station to reach work temperature of 350 degrees celsius. The hot air blow, 10 seconds.

Soldering station:

• power: 75 W
• temperature range: 200 - 480 °C
• temperature measure precision: + - 1 °C
• sleep mode: 10 min

Hot-air station:

• power: 750 W
• temperature range: 100 - 480 °C
• temperature measure precision: + - 2 °C
• airflow: max 120 l/min
• fluid airflow regulation
• brushless fan driven blower guarantees quiet work
• automatic cooling and hibernation of the unit when the hot-air handle is placed in the holder on the side of the station
• three circular hot-air nozzles with diameters: 4,4 mm, 8 mm, 10 mm
• suqare hot-air nozzle: 12 mm

common functions:

• temperature stabilisation
• sensors failure detection
• on-off button on the front
• fuse placed inside the power socket

Temperature stabilisation function

Allows to keep a set and stable blade temperature for a sturdy soldering. Depending on the size of the component to be soldered and the soldering field, the soldering tip gives off more or less heat, and the device, with the help of a built-in tip temperature sensor, continuously reads its actual value and compares it to the set temperature, then increases or decreases power consumption as required to maintain the set temperature.

Sleep mode

Station can be set to the stand-by mode, which lowers the temperature to 200°C. This helps to increase the blade's longevity. The machine will enter sleep mode after 10 minutes of idle work.

Automatic, cooling sleep mode function

Allows the hot-air module to cool the nozzle to 100 °C and then go into sleep mode. The operator, after the work is done, should put the handle into a plastic holder with an integrated sensor activation element, then the nozzle is cooled down and automatically hibernates. Picking up the handle from the handle automatically activates the hot-air module to the pre-set parameters.

Sensors failure detection

Allows for autodetection and diagnosis of the electronical components failures. The diagnostic process is started after powering up the machine. If any problem is detected, the error message will be displayed on the LED screen.